Magni正式推出了一系列新的固定臂伸缩式叉装车，以补充其现有的旋转伸缩臂叉装车系列。

新的TH系列包括7种型号，这些型号将在这家意大利制造商唯一的生产基地制造（35,000平方米的工厂）。

随着最近公司新总部的落成，公司将在此生产RTH旋转伸缩臂叉装车系列，该公司的年产能为3,000台旋转式产品和1,500台固定动臂产品。

Magni的TH 6.20，是新型固定动臂伸缩臂叉装机系列中最大的产品。

TH系列产品的起升高度为8m至24m，工作能力为5-6吨。包括起重能力5.5吨，起升高度15m；起重能力5.5吨，起升高度19m； 起重能力5.5吨，起升高度24m；起重能力6吨，起升高度10m；起重能力5吨，起升高度8m；起重能力6吨，起升高度20m。

Magni说，这些机器的尺寸与其提升能力有关，并且包括多盘制动器，四轮驱动和四轮转向。自调平系统是标准配置，允许设备在崎岖地形条件工作，并在-8至+8度倾斜角度运行。

新设计采用了更低的底盘，降低了重心，从而提供了更高的稳定性。尽管如此，该公司表示，产品的离地间隙仍然非常出色。

产品配备先进的驾驶室，具有全方位视野，FOPS / ROPS保护结构和100％空气过滤，可调节的转向柱和7英寸触摸屏。操作员可以轻松查看各种变量，包括驾驶、举升、支腿和驾驶室管理等，并提供11种语言选择。

Magni固定臂TH 5,5.15系列

该系列配备道依茨发动机，具有Stage V、VF或3A选择。

最大的75kW版本标配空调，吊篮定位以及在悬吊负载下工作的能力。入门级55kW机器采用基础配置，但还可以选择配备空调。所有型号均具有符合EN 13489安全标准的负载传感系统、电子比例操纵杆和控制系统。

机器的液压系统配备电气管理系统，可以自动为所需动力选择最佳发动机转速，从而减少燃油消耗。

动臂由高强度钢制成，使其坚固而灵活，同时增加了负载能力。自动附件系统也是标准配置，使每种型号以及Magni的TH和RTH系列之间的附件更换都很容易。添加附件后，系统将会自动识别附件，并且显示屏将上传载荷图表并设置载荷极限。

本文源自KHL，原文如下：

Magni launches new fixed boom telehandlers

By Euan Youdale

Magni has officially launched a new range of fixed boom telehandlers, complementing its existing range of rotating telehandlers.

The new TH range comprises seven models, which are being built at the Italian manufacturer’s 35,000 square metre facility, formally its only production base.

With the recent completion of a new 35,000 square metre headquarters, on a 200,000 square metre site, where Magni’s existing RTH rotating telehandler range will now be produced, the company has the capacity to manufacture 3,000 rotating and 1,500 fixed boom units a year.

Magni's TH 6.20, the largest in the new fixed boom telehandler range 

With rotating units from 8m to 24m lifting height, the TH range comes with 5 tonne to 6 tonne capacities: 5.5 tonnes lifting capacity, 15m lifting height; 5.5 tonnes capacity, 19m height; 5.5 tonnes capacity, 24m height; 6 tonnes capacity, 10m height; 5 tonnes capacity, 8m height; and 6 tonnes capacity, 20m height.

The machines have compact dimensions in relation to their lifting capacity, says Magni, and include multi-disc brakes, four-wheel drive and four-wheel steer. The self-levelling system comes as standard, allowing the equipment to work on a range of irregular terrain and operates at between -8 and +8 degrees.

The new design incorporates a lowered chassis that drops the centre of gravity, providing extra stability. Despite this, the company says there is still an outstanding level of ground clearance.

The state-of-the-art cab comes with full visibility, FOPS/ROPS and 100% air filtration, adjustable steering column and a 7-inch touch screen. It allows the operator to easily see a range of variables, including driving, lifting, outriggers and cab management, and provides written messages in 11 languages.

Other features across the TH models include pivoting stabilisers, which are quick and easy to deploy, while the boom stays in shape when retracted so there are no protrusions at the front of the machine.

Magni fixed boom TH 5,5.15 

Magni TH 5,5.15

The range is powered by a Deutz engine, with Stage V, VF or 3A options and is designed for easy access and maintenance.

The largest 75kW version comes with air conditioning as standard, basket positioning and the ability to work with suspended loads. The entry level 55kW machine is a more basic model, yet has air conditioning available as an option. All models feature a load sensing system, an electro-proportional joystick and a control system that complies to EN 13489 safety standards.

The hydraulics’ electric management system means the best engine speed is automatically chosen for the required power, providing a reduction in fuel consumption. The manufacturer also uses pipes, rather than hoses, for a range of benefits, including a tidy set up that helps with maintenance.

The booms are made from high tensile streel, making them tough and flexible, while increasing load capacity. An automatic attachment system also comes as standard, making attachment changes easy for each model, as well as between Magni’s TH and RTH ranges. Once an attachment is added it is recognised automatically and the display uploads the load chart and load limit is set.

See the linked video for all the information and a rundown of each model.

Source：https://www.khl.com/news/magni-launches-new-fixed-boom-telehandlers/8009676.article

免责声明：本网站内容来自作者投稿或互联网转载，目的在于传递更多信息，不代表本网赞同其观点或证实其内容的真实性。文章内容及配图如有侵权或对文章观点有异议，请联系我们处理。如转载本网站文章，务必保留本网注明的稿件来源，并自行承担法律责任。联系电话：0535-6792765