总部位于韩国蔚山的现代建筑设备（HCE）完成了技术创新中心的建设，为提升其品牌可靠性铺平了道路。

现代建筑设备公司于2020年10月26日举行了技术创新中心的竣工仪式，首席执行官Kong Ki-young以及高管和员工参加了典礼。

现代技术创新中心的建设于2019年9月开始，包括占地40,000平方米的成品设备可靠性评估大楼和性能评估实验室，总投资额为770亿韩元。

该中心建有16个实验室，可容纳约100名研究人员，主要进行从零件到成品设备的质量研究和验证。

中心内建立了先进ICT技术的综合控制系统办公室，以监控现有的耐久性中心以及技术创新中心的实验室和测试场，并全面控制各种数据。

此外，可靠性评估大楼还配备了一个大型环境室，可以在-40°C至80°C的极端环境中检查设备的性能，包括模拟器以及最新的测试和测量设备。从开发阶段开始进行彻底的初步检查和验证。

此外，将进行各种研究和实验，例如环保技术，高效技术，降噪技术以及先进的虚拟验证系统，以应对日益严格的排放法规。因此，技术创新中心有望成为提升建筑设备质量和技术的摇篮。

“即使在经济衰退期间，我们在质量创新方面的投资也绝不妥协。相反，我们应该努力从开发阶段就大幅提高质量，以回报客户的信任。”现代建筑设备公司首席执行官Kong Ki-young在竣工仪式上说。

本文源自hceamericas.com，原文如下：

HYUNDAI CONSTRUCTION EQUIPMENT COMPLETES CONSTRUCTION OF “TECHNOLOGY INNOVATION CENTER” THE CRADLE OF QUALITY INNOVATION

Hyundai Construction Equipment (HCE) headquarters completed the construction of a Technology Innovation Center in Ulsan, South Korea. The focus of the center is to serve as a cradle of quality innovation to pave the way for strengthening brand reliability.

A completion ceremony for the Technology Innovation Center was held by Hyundai Construction Equipment in Yongin, Gyeonggi-do on October 26 (Wed.), 2020, with CEO Kong Ki-young and executives and employees in attendance.

Construction of the Technology Innovation Center was commenced in September 2019 and was completed by establishing the reliability assessment building and the performance evaluation laboratory for finished equipment on a total land area of 40,000㎡ (12,200-pyeong), with total investment of KRW 77 billion.

The Center will accommodate 16 laboratories with some 100 research personnel to carry out quality research and verification from parts to finished equipment.

hyundai integrated control room

Integrated Control Room

In particular, Hyundai Construction Equipment has established the integrated control system office combining cutting-edge ICT technology inside the Center in order to monitor the existing durability center in Gunsan and the laboratory and testing ground in the Technology Innovation Center and control all kinds of data comprehensively.

In addition, the reliability assessment building is equipped with a large environmental chamber that can check the performance of equipment in extreme environments from -40 ° C to 80 ° C, including simulators and state-of-the-art test and measurement equipment in order to conduct thorough preliminary checking and verification from the development stage.

Furthermore, various researches and experiments will be conducted such as eco- friendly technology, high efficiency, noise reduction technology, and sophistication of virtual verification system to cope with the increasingly stricter exhaust gas regulations. Therefore, the Technology Innovation Center is expected to become the cradle of advancement of construction equipment quality and technology.

“We should never compromise when it comes to our investments in quality innovation even during the recession. Instead, we should strive to make a sharp improvement in quality from the development stage so as to repay our clients for their trust,” said Kong Ki-young, CEO of Hyundai Construction Equipment, during the building completion ceremony.

免责声明：本网站内容来自作者投稿或互联网转载，目的在于传递更多信息，不代表本网赞同其观点或证实其内容的真实性。文章内容及配图如有侵权或对文章观点有异议，请联系我们处理。如转载本网站文章，务必保留本网注明的稿件来源，并自行承担法律责任。联系电话：0535-6792765