近日，第一台新型利勃海尔LTM 1120-4.1移动式伸缩臂起重机正式交付英国客户City Lifting。

利勃海尔LTM 1120-4.1起重机符合欧V排放法规，工作能力为120吨，具有7节、66米的动臂。使用10.8至19米的双副臂，最大可偏移40度。安装7米长的中间臂节，其最大高度可超过94米，最大半径为64米。

City Lifting公司的大部分工作都是在伦敦市内狭窄的工作场所进行。 公司负责人Trevor Jepson说：“我们之所以选择这款起重机，是因为它的吊臂格外坚固，可以完全伸展至66米。结合仅7米的支腿宽度和3.8米的最小尾部半径，它是架设塔式起重机或起吊重型空调设备的理想选择。”

原文如下：

LTM 1120-4.1 for City Lifting

By Alex Dahm

Liebherr LTM 1120-4.1 in red and white City Lifting colours

City Lifting’s LTM 1120-4.1 meets Euro Stage V exhaust emission regulations, comes with VarioBase, VarioBallast and remote control

City Lifting takes delivery of the UK’s first unit of the new Liebherr LTM 1120-4.1 wheeled mobile telescopic crane.

This 120 tonne capacity wheeled mobile crane has a seven section, 66 metre boom claimed as the longest on a four axle carrier. It has been specified with a 10.8 to 19 metre double fly jib, which offsets by up to 40 degrees. With the seven metre insert it achieves a maximum tip height of more than 94 metres. Maximum radius is 64 metres.

Much of City Lifting’s work is in the often confined spaces of job sites in the City of London. Trevor Jepson, City Lifting owner, said, “We chose this crane because of its exceptionally strong boom which fully telescopes to 66 metres. Combined with only 7 metre outrigger width and a minimum tail radius of 3.8 metres it is ideal for erecting tower cranes or lifting heavy air conditioning equipment. A lot of our work is in the City where space is limited so this new LTM 1120-4.1 is the ideal solution.”

Source: https://www.khl.com/news/ltm-112041-for-city-lifting/8010707.article

免责声明：本网站内容来自作者投稿或互联网转载，目的在于传递更多信息，不代表本网赞同其观点或证实其内容的真实性。文章内容及配图如有侵权或对文章观点有异议，请联系我们处理。如转载本网站文章，务必保留本网注明的稿件来源，并自行承担法律责任。联系电话：0535-6792765